Peterbilt 386 Truck Parts

AC Adapter Bracket - Cat C12 Pad Mount AC Compressor

$355.00

AC Adapter Bracket - Cat C15/3406E Pad Mount AC Compressor

$335.00

AC Adapter Bracket Kit - Cat C15/3406E - AC Pad Mount Bracket and Dual V Belt AC Clutch

$480.00

AC Compressor - Ear Mount Base - Dual V Belt Clutch

$385.00

AC Compressor - Pad Side Mount Base - Cat or Cummins 6 Groove

$385.00

AC Compressor - Pad Top Mount Base - Cat 6 Groove

$385.00

AC Compressor - Pad Top Mount Base - Cat/Detroit 8 Groove

$385.00

AC Compressor Clutch - 6 Groove Serpentine

$160.00

AC Compressor Clutch - 8 Groove Serpentine

$160.00

AC Compressor Clutch - Dual V-Belt

$160.00

AC High Pressure NC Switch

$45.00

AC Plumbing - Kenworth or Peterbilt - Discharge Line

$445.00

A universal 22-degree air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 22 Degree - 6"

$52.00

A universal 45-degree air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 45 Degree - 6"

$39.00

A universal 90-degree LONG RADIUS air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 90 Degree - 6" - Long Radius

$139.00

A universal 90-degree short radius air intake elbow, 6" x 6" OD Tube

Air Intake Elbow - 90 Degree - 6" - Short Radius

$34.00

A 90-degree reducing air intake elbow, 5" x 4" OD tube.

Air Intake Elbow - 90 Degree Reducing - 5" x 4"

$34.00

90 Degree Air Intake Elbow reduces from 5.5" inside diameter to 5" inside diameter

Air Intake Elbow - 90 Degree Reducing - 5.5" x 5"

$25.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5"

$34.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5.5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5.5"

$54.00

A universal air intake straight hump hose. Each side of the hump hose accepts a 6" OD tube.

Air Intake Hump Hose - Straight - 6"

$34.00

An air intake piping kit for a Peterbilt 386 truck with under hood, engine mounted air cleaner when installing a Cummins ISX CM570 engine, Caterpillar C12 engine or a Detroit Diesel Series 60 DDEC3 or DDEC4 engine.

Air Intake Piping Kit - Air Cleaner Outlet to Turbo - Peterbilt 386 - Cat C12 - Cummins ISX CM570 - Detroit DDEC3/4/5

$425.00

An Air Intake Piping Kit for a Peterbilt 386 truck when installing a Caterpillar C15 ACERT engine with ADEM3 engine electronics.

Air Intake Piping Kit - Air Cleaner Outlet to Turbo - Peterbilt 386 - Cat C15 ACERT

$265.00

Piping adapter kit to connect the air intake on a Peterbilt 386 truck with a firewall mounted air cleaner to the turbo on a Caterpillar C15 SDP twin turbo engine.

Air Intake Piping Kit - Air Cleaner to Turbo - Peterbilt 386 - Cat C15 SDP

$265.00

Piping adapter kit to connect the air intake on a Peterbilt 386 truck with a firewall mounted air cleaner to the turbo on a Caterpillar C15 or 3406E single turbo engine.

Air Intake Piping Kit - Air Cleaner to Turbo - Peterbilt 386 - Cat C15/3406E Single Turbo

$425.00

A Peterbilt 386 with Cummins ISX CM870 or CM871 air intake adapter kit

Air Intake Piping Kit - Air Cleaner to Turbo - Peterbilt 386 - Cummins ISX CM870/871

$595.00

Piping adapter kit to connect the air intake on a Peterbilt 386 truck with an underhood, firewall mounted air cleaner to the turbo on a Cummins N14 engine.

Air Intake Piping Kit - Air Cleaner to Turbo - Peterbilt 386 - Cummins N14

$425.00

Alternator - Presto Lite Pad Mount 170 Amp

$350.00

Alternator Pulley - 12 Groove Serpentine

$156.00

Alternator Pulley - Caterpillar - 8 Groove Serpentine

$140.00

Battery Cable Kit - Extended Length

$795.00

Battery Cable Kit - Standard Length

$535.00

A battery hold down kit for Peterbilt trucks that have a step box battery box underneath the drivers or passenger side door.

Battery Hold Down Kit - Peterbilt Step Box Battery Box

$310.00

Set of serpentine belts for a Detroit Series 60

Belt Set - 10/8 Groove Serpentine - Top Mount - 12" Fan Center Height

$110.00

A set of serpentine belts for a Caterpillar 3406E or C15 engine with a 12" fan mounting height

Belt Set - 8/6 Groove Serpentine - Side Mount - 12" Fan Center Height

$110.00

Belt Set - 8/6 Groove Serpentine - Top Mount - 12" Fan Center Height

$115.00

A replacement set of belts for 12/6 groove serpentine belt configuration with a TOP mount pad mount style A/C mounting bracket.

Belt Set - Cat 12/6 Groove Serpentine - Top Mount - 12" Fan Center Height

$110.00

A set of serpentine belts for a Cummins ISX engine with a 12 groove main drive belt and a 6 groove accessory drive belt

Belt Set - Cummins 12/6 Groove Serpentine - Side Mount - 12" Fan Center Height

$145.00

V-Belts for a Caterpillar engine with a 12" Fan Mounting Height

Belt Set - Dual V-Belt - Top Mount - 12" Fan Center Height

$180.00

CAC Air Intake Manifold - Cummins N14 Celect Plus - Kenworth or Peterbilt

$3,330.00

A Detroit Diesel Series 60 Air Intake Manifold

CAC Air Intake Manifold - Detroit DDEC3/4 - Kenworth or Peterbilt

$2,995.00

An air intake elbow kit for Caterpillar C10 or C12 engines for use with external air cleaners

CAC Intake Elbow Kit - Cat C10 or C12 - External Air Cleaners

$520.00

A Caterpillar 3406E or C-15 air intake elbow kit for the left side (drivers) of the engine in mill finish

CAC Intake Elbow Kit - Cat C15 or 3406E

$395.00

Carrier Bearing Plate

$105.00

Caterpillar 3406E 70 Pin Stainless Steel Fuel Line Kit for a high mount fuel filter base and stock air compressor

Cat Stainless Braided Hose Kit - 3406E 2WS - High Mount Fuel Filter Base

$595.00

Caterpillar 3406E 70 Pin Stainless Steel Fuel Line Kit for a standard mount fuel filter base and stock air compressor

Cat Stainless Braided Hose Kit - 3406E 2WS - Standard Mount Fuel Filter Base

$595.00

Replacement Stainless Braided hose kit for a Caterpillar 3406E, 40 Pin ECM with the serial prefix 1LW.

Cat Stainless Braided Hose Kit - 3406E 40 Pin - 1LW - Standard Mount Fuel Filter Base

$595.00

Caterpillar 3406E 40 Pin Stainless Steel Fuel Line Kit for a standard mount fuel filter base and stock air compressor

Cat Stainless Braided Hose Kit - 3406E 40 Pin - 5EK or 6TS - Standard Mount Fuel Filter Base

$595.00

Caterpillar 3406E 40 Pin Coolant supply lines for the #5 and #6 cylinder. One Coolant supply line from the Rear Water Bonnet to the #5 Cylinder. Coolant supply line from the Rear Water Bonnet to the #6 Cylinder (3) Stainless Steel 1/2" NPT x 1/2" Male JIC Fittings - 90 Degree. (1) Stainless Steel 1/2" NPT x 1/2" Male JIC Fittings - 45 Degree

Cat Stainless Braided Hose Kit - 3406E 40 Pin - Coolant Supply Lines for #5 and #6 Cylinder

$325.00

Caterpillar C15 70 Pin Stainless Steel Fuel Line Kit for a high mount fuel filter base and stock air compressor

Cat Stainless Braided Hose Kit - C15 6NZ - High Mount Fuel Filter Base

$595.00

Cat Stainless Braided Hose Kit - C15 6NZ - Standard Mount Fuel Filter Base

$495.00

Cat Stainless Braided Hose Kit - C15/3406E 70 Pin - Coolant Supply Lines to #4 Cylinder

Cat Stainless Braided Hose Kit - C15 or 3406E 70 Pin - Coolant Supply Lines to #4 Cylinder

$535.00

Caterpillar Front Engine Upfit - C12/C13 - 8 Groove Serpentine

$3,119.00

This front engine upfit kit for Caterpillar C15 and 3406E engines, This 12 groove serpentine upfit kit is designed to be used with a SIDE Mount Pad style AC Compressor and a Pad Mount Alternator.

Caterpillar Front Engine Upfit - C15/3406E - 12/6 Groove Serpentine - Side Mount AC

$4,295.00

Caterpillar Front Engine Upfit - C15/3406E - 12/6 Groove Serpentine - Top Mount AC

$4,215.00

Caterpillar Front Engine Upfit - C15/3406E - 8/6 Groove Serpentine - Side Mount AC

$3,495.00

Caterpillar Front Engine Upfit - C15/3406E - 8/6 Groove Serpentine - Top Mount AC

$3,415.00

A front engine trimout kit for a Caterpillar C15 or 3406E engine to run dual v-belts

Caterpillar Front Engine Upfit - C15/3406E - V-Belt Configuration

$1,185.00

Caterpillar Fuel Line Plumbing Kit - Compression Fittings & Composite Hose

$330.00

Caterpillar Fuel Line Plumbing Kit - JIC Fittings & Nitrile Braided Hose

$595.00

Caterpillar Fuel/Water Separator - Yellow

$35.00

An air to air hose used to connect the left or right side charge air cooler tube to the engine and the charge air cooler.

Charge Air Cooler Hump Hose - Black

$40.00

A 4" stainless steel constant torque clamp

Clamp - Constant Torque - 4" Stainless Steel

$16.00

Constant Torque CT-650 clamp with stainless steel finish

Clamp - Constant Torque - 5" Stainless Steel

$13.00

A 5.5" stainless steel constant torque clamp

Clamp - Constant Torque - 5.5" Stainless Steel

$19.00

A stainless steel constant torque clamp typically used to clamp an intake boot to the pipe. For use on 6" diameter intake systems.

Clamp - Constant Torque - 6" Stainless Steel

$16.00

Clutch Micro Switch

$40.00

Coolant Distribution Manifold - 3 Port - Bare Block

$545.00

Kustom Truck 3-port coolant distribution manifold kit

Coolant Distribution Manifold - 3 Port - With Fittings

$1,195.00

Coolant Distribution Manifold - 5 Port - Bare Block

$695.00

Kustom Truck 5-port coolant distribution manifold kit

Coolant Distribution Manifold - 5 Port - With Fittings

$1,780.00

Cooling Module Ground Harness - Kenworth or Peterbilt

$115.00

Cummins Front Engine Upfit - ISM/M11 - 8 Groove Serpentine

$2,250.00

Cummins ISX 12/6 groove serpentine belt configuration kit

Cummins Front Engine Upfit - ISX - 12/6 Groove Configuration

$3,525.00

Cummins Fuel Line Plumbing Kit - Compression Fittings & Composite Hose

$330.00

Cummins Fuel Line Plumbing Kit - JIC Fittings & Nitrile Braided Hose

$595.00

A Cummins N14 Thermostat with Vertical Outlet

Cummins N14 Thermostat Housing - Vertical Outlet

$1,285.00

Genuine Detroit Diesel Series 60 vertical thermostat housing and seal kit to attach to the engine block on DDEC3 or DDEC4 engine electronics.

Detroit DDEC3/4 Thermostat Housing and Seal Kit - Vertical Outlet

$435.00

Detroit Diesel Engine upfit kit for a 10 groove serpentine main drive belt and an 8 groove serpentine accessory drive belt.

Detroit Front Engine Upfit - 10/8 Groove Serpentine Kit - Fits Kenworth T660/T800 or Peterbilt 386

$1,815.00

Detroit Front Engine Upfit - Accessory Drive Kit

$1,125.00

An installation kit to plumb the fuel lines from the splitter valves to a Detroit engine with composite hose and compression fittings.

Detroit Fuel Line Plumbing Kit - Compression Fittings & Composite Hose

$330.00

Kit to plumb the fuel lines from the splitter valves to a Detroit Diesel Series 60 engine with nitrile braided hose and JIC fittings.

Detroit Fuel Line Plumbing Kit - JIC Fittings & Nitrile Braided Hose

$595.00

Detroit Water Pump Coolant Fitting Kit for the Pump to Coolant Reservoir

$145.00

Exhaust Kit - Dynaflex - Peterbilt/Kenworth

$3,950.00

Exhaust Kit - Lincoln Chrome - Peterbilt/Kenworth

$3,950.00

Exhaust Piping - Level 1 - Below Frame

$600.00

Fan Blade - 30" Diameter - 9 Blades - 2.5" Pilot

$235.00

A 30 inch diameter, 9 blade fan with a 5 inch pilot diameter

Fan Blade - 30" Diameter - 9 Blades - 5" Pilot

$290.00

Fan Blade - 32" Diameter - 11 Blades - 2.5" Pilot

$275.00

A 32" diameter, 9 blade engine cooling fan

Fan Blade - 32" Diameter - 9 Blades - 2.5" Pilot

$235.00

Fan Blade - 32" Diameter - 9 Blades - 5" Pilot

$322.00

A Horton Drivemaster on/off fan hub for Caterpillar C11, C12 or C13 engines

Fan Hub - Cat C11/12/13 - On/Off 8 Groove Serpentine - Drivemaster

$1,690.00

Horton Drive Master Advantage Fan Hub for Caterpillar 3406E or C15 engines

Fan Hub - Cat C15/3406E - On/Off 12/6 Groove Serpentine - DM Advantage

$1,720.00

Horton Drivemaster Advantage on/off fan hub for Caterpillar 34046e or C15 engines

Fan Hub - Cat C15/3406E - On/Off 8/6 Groove Serpentine - DM Advantage

$1,635.00

Horton Drivemaster Advantage On/Off Fan hub for Caterpillar 3406E or C15 engines

Fan Hub - Cat C15/3406E - On/Off Dual V Belt - DM Advantage

$1,695.00

Fan Hub - Cummins ISX - On/Off 12 Groove Serpentine - DM Advantage

$1,690.00