Kenworth T600 Truck Parts

40 to 70 Pin Adapter Harness, ADEM2 to ADEM2000

Adapter Harness - Caterpillar 3116/3126 40 Pin to 3126B/3126E/C7/C9 70 Pin

$950.00

Caterpillar Adapter Harness to go from a 3176 with a 2YG serial prefix to a 40 Pin, ADEM2 ECM

Adapter Harness - Caterpillar 3176 2YG to 40 Pin

$950.00

Plug & Play adapter harness that adapts from Cat 3176 2YG chassis electronics to Cat ADEM2000 or ADEM3 (70 Pin) engine.

Adapter Harness - Caterpillar 3176 2YG to 70 Pin

$950.00

Caterpillar Adapter Harness to go from a 3406B with a 8TC serial prefix to a 40 Pin, ADEM2 ECM

Adapter Harness - Caterpillar 3406B 8TC to ADEM2 40 Pin

$950.00

Caterpillar ADEM2 to ADEM2000 or ADEM3 ECM electronics

Adapter Harness - Caterpillar 40 Pin to 70 Pin

$750.00

A Caterpillar adapter harness to allow a 40 Pin with ADEM2 engine electronics to be installed in place of a Caterpillar engine with PEEC engine electronics

Adapter Harness - Caterpillar 40 Pin to PEEC

$950.00

Adapter Harness - Caterpillar 70 Pin to 40 Pin

$750.00

Caterpillar adapter harness for PEEC to ADEM2 electronics

Adapter Harness - Caterpillar PEEC to 40 Pin

$750.00

Adapter Harness - Caterpillar PEEC to 70 Pin

$950.00

A universal 22-degree air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 22 Degree - 6"

$52.00

A universal 90-degree LONG RADIUS air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 90 Degree - 6" - Long Radius

$139.00

A universal 90-degree short radius air intake elbow, 6" x 6" OD Tube

Air Intake Elbow - 90 Degree - 6" - Short Radius

$34.00

A 90-degree reducing air intake elbow, 5" x 4" OD tube.

Air Intake Elbow - 90 Degree Reducing - 5" x 4"

$34.00

90 Degree Air Intake Elbow reduces from 5.5" inside diameter to 5" inside diameter

Air Intake Elbow - 90 Degree Reducing - 5.5" x 5"

$25.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5"

$34.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5.5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5.5"

$54.00

A universal air intake straight hump hose. Each side of the hump hose accepts a 6" OD tube.

Air Intake Hump Hose - Straight - 6"

$34.00

Alternator - Presto Lite Pad Mount 170 Amp

$350.00

Alternator Pulley - 12 Groove Serpentine

$156.00

Alternator Pulley - Caterpillar - 8 Groove Serpentine

$140.00

Set of serpentine belts for a Detroit Series 60

Belt Set - 10/8 Groove Serpentine - Top Mount - 12" Fan Center Height

$110.00

A set of serpentine belts for a Caterpillar 3406E or C15 engine with a 12" fan mounting height

Belt Set - 8/6 Groove Serpentine - Side Mount - 12" Fan Center Height

$110.00

Belt Set - 8/6 Groove Serpentine - Top Mount - 12" Fan Center Height

$115.00

A replacement set of belts for 12/6 groove serpentine belt configuration with a TOP mount pad mount style A/C mounting bracket.

Belt Set - Cat 12/6 Groove Serpentine - Top Mount - 12" Fan Center Height

$110.00

A set of serpentine belts for a Cummins ISX engine with a 12 groove main drive belt and a 6 groove accessory drive belt

Belt Set - Cummins 12/6 Groove Serpentine - Side Mount - 12" Fan Center Height

$145.00

V-Belts for a Caterpillar engine with a 12" Fan Mounting Height

Belt Set - Dual V-Belt - Top Mount - 12" Fan Center Height

$180.00

CAC Air Intake Manifold - Cummins N14 Celect Plus - Kenworth or Peterbilt

$3,330.00

A Detroit Diesel Series 60 Air Intake Manifold

CAC Air Intake Manifold - Detroit DDEC3/4 - Kenworth or Peterbilt

$2,995.00

CAC Intake Elbow Kit - Cat C10 or C12 - Kenworth T660 - Engine Mounted Air Cleaner

$620.00

A Caterpillar 3406E or C-15 air intake elbow kit for the left side (drivers) of the engine in mill finish

CAC Intake Elbow Kit - Cat C15 or 3406E

$395.00

Carrier Bearing Plate

$105.00

Caterpillar Front Engine Upfit - C12/C13 - 8 Groove Serpentine

$3,119.00

This front engine upfit kit for Caterpillar C15 and 3406E engines, This 12 groove serpentine upfit kit is designed to be used with a SIDE Mount Pad style AC Compressor and a Pad Mount Alternator.

Caterpillar Front Engine Upfit - C15/3406E - 12/6 Groove Serpentine - Side Mount AC

$4,295.00

Caterpillar Front Engine Upfit - C15/3406E - 12/6 Groove Serpentine - Top Mount AC

$4,215.00

Caterpillar Front Engine Upfit - C15/3406E - 8/6 Groove Serpentine - Side Mount AC

$3,495.00

Caterpillar Front Engine Upfit - C15/3406E - 8/6 Groove Serpentine - Top Mount AC

$3,415.00

A front engine trimout kit for a Caterpillar C15 or 3406E engine to run dual v-belts

Caterpillar Front Engine Upfit - C15/3406E - V-Belt Configuration

$1,185.00

A toggle switch, dash label and sensor kit for the dash of a heavy duty truck

Caterpillar Legacy Engine Harness - Cat - Switch, Sensor and Label Kit

$750.00

A generic engine control harness to install a Caterpillar 40 Pin engine with ADEM2
electronics, cab to engine ecm harness.

Caterpillar Legacy Engine Harness - Cat 40 Pin - ADEM2

$3,650.00

A generic engine control harness to install a Caterpillar 40 Pin engine with ADEM2
electronics that is using a brake saver, cab to engine ecm harness.

Caterpillar Legacy Engine Harness - Cat 40 Pin - ADEM2 with Brakesaver Provisions

$3,650.00

A generic engine control harness to install a Caterpillar 70 Pin engine with ADEM2000 or ADEM3 electronics, cab to engine ECM harness.

Caterpillar Legacy Engine Harness - Cat 70 Pin - ADEM2000 or ADEM3

$3,650.00

An air to air hose used to connect the left or right side charge air cooler tube to the engine and the charge air cooler.

Charge Air Cooler Hump Hose - Black

$40.00

A 4" stainless steel constant torque clamp

Clamp - Constant Torque - 4" Stainless Steel

$16.00

Constant Torque CT-650 clamp with stainless steel finish

Clamp - Constant Torque - 5" Stainless Steel

$13.00

A 5.5" stainless steel constant torque clamp

Clamp - Constant Torque - 5.5" Stainless Steel

$19.00

A stainless steel constant torque clamp typically used to clamp an intake boot to the pipe. For use on 6" diameter intake systems.

Clamp - Constant Torque - 6" Stainless Steel

$16.00

Cross Member Kit - Kenworth

$1,175.00

Cummins Front Engine Upfit - ISM/M11 - 8 Groove Serpentine

$2,250.00

Cummins ISX 12/6 groove serpentine belt configuration kit

Cummins Front Engine Upfit - ISX - 12/6 Groove Configuration

$3,525.00

A generic engine control harness to install a Cummins N14 with Celect Plus electronics, cab to engine ecm harness.

Cummins Legacy Engine Harness - Celect Harness

$3,650.00

A generic engine control harness to install a Cummins N14 engine with Celect Plus electronics, cab to engine ecm harness.

Cummins Legacy Engine Harness - Celect Plus Harness

$3,650.00

A generic engine control harness to install a Cummins ISX Engine with CM570 electronics, cab to engine ecm harness.

Cummins Legacy Engine Harness - CM570 Harness

$3,650.00

Cummins Legacy Engine Harness - ISX - Switch, Sensor and Label Kit

$750.00

Cummins Legacy Engine Harness - ISX CM870 or ISM CM875 Harness

$3,650.00

Cummins Legacy Engine Harness - ISX CM871 or ISM CM876 Harness

$3,650.00

Cummins Legacy Engine Harness - N14 - Switch, Sensor and Label Kit

$750.00

A Cummins N14 Thermostat with Vertical Outlet

Cummins N14 Thermostat Housing - Vertical Outlet

$1,285.00

Detroit Diesel Engine upfit kit for a 10 groove serpentine main drive belt and an 8 groove serpentine accessory drive belt.

Detroit Front Engine Upfit - 10/8 Groove Serpentine Kit - Fits Kenworth T660/T800 or Peterbilt 386

$1,815.00

Detroit Front Engine Upfit - Accessory Drive Kit

$1,125.00

A generic engine control harness to install a Detroit Diesel Series 60 engine with DDEC3 or DDEC4 electronics, cab to engine ecm harness.

Detroit Legacy Engine Harness - S60 DDEC3 or DDEC4 Harness

$3,650.00

Detroit Legacy Engine Harness - S60 DDEC3, DDEC4 and DDEC5 - Switch, Sensor and Label Kit

$750.00

A generic engine control harness to install a Detroit Diesel Series 60 engine with DDEC5 electronics, cab to engine ecm harness.

Detroit Legacy Engine Harness - S60 DDEC5 Harness

$3,650.00

Exhaust Piping - Level 1 - Below Frame

$600.00

Fan Blade - 30" Diameter - 9 Blades - 2.5" Pilot

$235.00

A 30 inch diameter, 9 blade fan with a 5 inch pilot diameter

Fan Blade - 30" Diameter - 9 Blades - 5" Pilot

$290.00

Fan Blade - 32" Diameter - 11 Blades - 2.5" Pilot

$275.00

A 32" diameter, 9 blade engine cooling fan

Fan Blade - 32" Diameter - 9 Blades - 2.5" Pilot

$235.00

Fan Blade - 32" Diameter - 9 Blades - 5" Pilot

$322.00

A Horton Drivemaster on/off fan hub for Caterpillar C11, C12 or C13 engines

Fan Hub - Cat C11/12/13 - On/Off 8 Groove Serpentine - Drivemaster

$1,690.00

Horton Drive Master Advantage Fan Hub for Caterpillar 3406E or C15 engines

Fan Hub - Cat C15/3406E - On/Off 12/6 Groove Serpentine - DM Advantage

$1,720.00

Horton Drivemaster Advantage on/off fan hub for Caterpillar 34046e or C15 engines

Fan Hub - Cat C15/3406E - On/Off 8/6 Groove Serpentine - DM Advantage

$1,635.00

Horton Drivemaster Advantage On/Off Fan hub for Caterpillar 3406E or C15 engines

Fan Hub - Cat C15/3406E - On/Off Dual V Belt - DM Advantage

$1,695.00

Fan Hub - Cummins N14 - On/Off Dual V Belt - HT/S Advantage

$1,725.00

A Horton Drivemaster Advantage Fan Hub for Detroit Series 60 engines

Fan Hub - Detroit Series 60 - On/Off 10 Groove Serpentine - DM Advantage 2

$1,695.00

Fan Solenoid - Normally Closed - 2 Speed

$150.00

Fan Solenoid - Normally Closed - On/Off

$150.00

Fan Solenoid - Normally Open - On/Off

$150.00

Front Engine Mount Bracket - Cat C12

$550.00

Front Engine Mount Bracket - Cat C15/3406E

$595.00

Front Engine Mount Bracket - Cummins ISX

$825.00

Detroit Diesel Series 60 Front motor mount for Peterbilt and Kenworth trucks

Front Engine Mount Bracket - Detroit Series 60 - Kenworth or Peterbilt

$1,370.00

Front Engine Mount Bushing Kit - with Hardware

$250.00

Kenworth Exhaust Piping - Level 1 - Above Frame

$525.00

Exhaust piping kit for a Cummins ISX model engine with a 4" Turbo outlet diameter

Kenworth Exhaust Piping - Level 1 - Above Frame - Cummins CM870 or CM871

$1,435.00

Kenworth Level 2 Above the frame exhaust piping kit

Kenworth Exhaust Piping - Level 2 - Above Frame

$925.00

Exhaust piping adapter kit to get from the back of turbo to the front of the "Y" Pipe on a Kenworth truck with a below the frame exhaust system.

Kenworth Exhaust Piping - Level 2 - Below Frame

$925.00

Exhaust piping adapter kit to get from the back of turbo to through the "Y" Pipe on a Kenworth truck with a below the frame standard Kenworth exhaust system.

Kenworth Exhaust Piping - Level 3 - Below Frame - For OEM Elbows

$1,425.00

Exhaust piping adapter kit to get from the back of turbo to through the "Y" Pipe on a Kenworth truck with a below the frame Pickett Style exhaust system.

Kenworth Exhaust Piping - Level 3 - Below Frame - For Pickett Elbows

$1,200.00

Kenworth Exhaust Piping - Level 3 - Below Frame - For Single Right Side

$995.00

Kenworth NAMUX1 Harness - Cat ADEM2000/3 70 Pin - 1

$2,950.00

An engine harness to install a Caterpillar 70 Pin ADEM2000 or ADEM3 engine into a Kenworth NAMUX1 truck

Kenworth NAMUX1 Harness - Cat ADEM2000/3 70 Pin - 2

$2,950.00

Kenworth NAMUX1 Harness - Cummins CM2250 - 2

$2,950.00

An engine harness to install a Cummins ISX CM2350 engine into a Kenworth NAMUX1 truck

Kenworth NAMUX1 Harness - Cummins CM2350 - 2

$2,950.00

Engine installation harness for installing a Cummins ISX engine (CM870 engine electronics) into a Kenworth truck with NAMUX1 chassis electronics and Caterpillar 70 Pin ADEM3 engine electronics.

Kenworth NAMUX1 Harness - Cummins CM870 - 1

$2,950.00

An engine harness to install a Cummins CM870 engine into a Kenworth NAMUX1 truck

Kenworth NAMUX1 Harness - Cummins CM870 - 2

$2,950.00

Engine installation harness for installing a Detroit Series 60 engine (DDEC5 engine electronics) into a Kenworth truck with NAMUX1 chassis electronics and Caterpillar 70 Pin ADEM3 engine electronics.

Kenworth NAMUX1 Harness - Detroit DDEC5 - 1

$2,950.00