Kenworth T2000 Truck Parts

40 to 70 Pin Adapter Harness, ADEM2 to ADEM2000

Adapter Harness - Caterpillar 3116/3126 40 Pin to 3126B/3126E/C7/C9 70 Pin

$950.00

Caterpillar Adapter Harness to go from a 3176 with a 2YG serial prefix to a 40 Pin, ADEM2 ECM

Adapter Harness - Caterpillar 3176 2YG to 40 Pin

$950.00

Plug & Play adapter harness that adapts from Cat 3176 2YG chassis electronics to Cat ADEM2000 or ADEM3 (70 Pin) engine.

Adapter Harness - Caterpillar 3176 2YG to 70 Pin

$950.00

Caterpillar Adapter Harness to go from a 3406B with a 8TC serial prefix to a 40 Pin, ADEM2 ECM

Adapter Harness - Caterpillar 3406B 8TC to ADEM2 40 Pin

$950.00

Adapter Harness - Caterpillar 40 Pin to 70 Pin

$750.00

A Caterpillar adapter harness to allow a 40 Pin with ADEM2 engine electronics to be installed in place of a Caterpillar engine with PEEC engine electronics

Adapter Harness - Caterpillar 40 Pin to PEEC

$950.00

Adapter Harness - Caterpillar 70 Pin to 40 Pin

$750.00

Adapter Harness - Caterpillar PEEC to 40 Pin

$750.00

Adapter Harness - Caterpillar PEEC to 70 Pin

$950.00

Alternator - Presto Lite Pad Mount 170 Amp

$350.00

Alternator Pulley - 12 Groove Serpentine

$156.00

Alternator Pulley - Caterpillar - 8 Groove Serpentine

$140.00

CAC Air Intake Manifold - Cummins N14 Celect Plus - Kenworth or Peterbilt

$3,330.00

A Detroit Diesel Series 60 Air Intake Manifold

CAC Air Intake Manifold - Detroit DDEC3/4 - Kenworth or Peterbilt

$2,995.00

CAC Intake Elbow Kit - Cat C10 or C12 - Kenworth T660 - Engine Mounted Air Cleaner

$620.00

A Caterpillar 3406E or C-15 air intake elbow kit for the left side (drivers) of the engine in mill finish

CAC Intake Elbow Kit - Cat C15 or 3406E

$395.00

Carrier Bearing Plate

$105.00

Caterpillar Front Engine Upfit - C12/C13 - 8 Groove Serpentine

$3,119.00

This front engine upfit kit for Caterpillar C15 and 3406E engines, This 12 groove serpentine upfit kit is designed to be used with a SIDE Mount Pad style AC Compressor and a Pad Mount Alternator.

Caterpillar Front Engine Upfit - C15/3406E - 12/6 Groove Serpentine - Side Mount AC

$4,295.00

Caterpillar Front Engine Upfit - C15/3406E - 12/6 Groove Serpentine - Top Mount AC

$4,215.00

Caterpillar Front Engine Upfit - C15/3406E - 8/6 Groove Serpentine - Side Mount AC

$3,495.00

Caterpillar Front Engine Upfit - C15/3406E - 8/6 Groove Serpentine - Top Mount AC

$3,415.00

A front engine trimout kit for a Caterpillar C15 or 3406E engine to run dual v-belts

Caterpillar Front Engine Upfit - C15/3406E - V-Belt Configuration

$1,185.00

A toggle switch, dash label and sensor kit for the dash of a heavy duty truck

Caterpillar Legacy Engine Harness - Cat - Switch, Sensor and Label Kit

$750.00

A generic engine control harness to install a Caterpillar 40 Pin engine with ADEM2
electronics, cab to engine ecm harness.

Caterpillar Legacy Engine Harness - Cat 40 Pin - ADEM2

$3,650.00

A generic engine control harness to install a Caterpillar 40 Pin engine with ADEM2
electronics that is using a brake saver, cab to engine ecm harness.

Caterpillar Legacy Engine Harness - Cat 40 Pin - ADEM2 with Brakesaver Provisions

$3,650.00

A generic engine control harness to install a Caterpillar 70 Pin engine with ADEM2000 or ADEM3 electronics, cab to engine ecm harness.

Caterpillar Legacy Engine Harness - Cat 70 Pin - ADEM2000 or ADEM3

$3,650.00

An air to air hose used to connect the left or right side charge air cooler tube to the engine and the charge air cooler.

Charge Air Cooler Hump Hose - Black

$40.00

Cross Member Kit - Kenworth

$1,175.00

Cummins Front Engine Upfit - ISM/M11 - 8 Groove Serpentine

$2,250.00

Cummins ISX 12/6 groove serpentine belt configuration kit

Cummins Front Engine Upfit - ISX - 12/6 Groove Configuration

$3,525.00

A generic engine control harness to install a Cummins N14 with Celect Plus electronics, cab to engine ecm harness.

Cummins Legacy Engine Harness - Celect Harness

$3,650.00

A generic engine control harness to install a Cummins N14 engine with Celect Plus electronics, cab to engine ecm harness.

Cummins Legacy Engine Harness - Celect Plus Harness

$3,650.00

Cummins Legacy Engine Harness - ISX - Switch, Sensor and Label Kit

$750.00

A generic engine control harness to install a Cummins ISX Engine with CM570 electronics, cab to engine ecm harness.

Cummins Legacy Engine Harness - ISX CM570 Harness

$3,650.00

Cummins Legacy Engine Harness - ISX CM870 or ISM CM875 Harness

$3,650.00

Cummins Legacy Engine Harness - ISX CM871 or ISM CM876 Harness

$3,650.00

Cummins Legacy Engine Harness - N14 - Switch, Sensor and Label Kit

$750.00

A Cummins N14 Thermostat with Vertical Outlet

Cummins N14 Thermostat Housing - Vertical Outlet

$1,285.00

Detroit Front Engine Upfit - 10/8 Groove Serpentine Kit - Fits Kenworth T660/T800 or Peterbilt 386

$1,815.00

Detroit Front Engine Upfit - Accessory Drive Kit

$1,125.00

A generic engine control harness to install a Detroit Diesel Series 60 engine with DDEC3 or DDEC4 electronics, cab to engine ecm harness.

Detroit Legacy Engine Harness - S60 DDEC3 or DDEC4 Harness

$3,650.00

Detroit Legacy Engine Harness - S60 DDEC3, DDEC4 and DDEC5 - Switch, Sensor and Label Kit

$750.00

A generic engine control harness to install a Detroit Diesel Series 60 engine with DDEC5 electronics, cab to engine ecm harness.

Detroit Legacy Engine Harness - S60 DDEC5 Harness

$3,650.00

Fan Blade - 30" Diameter - 9 Blades - 2.5" Pilot

$235.00

A 30 inch diameter, 9 blade fan with a 5 inch pilot diameter

Fan Blade - 30" Diameter - 9 Blades - 5" Pilot

$290.00

Fan Blade - 32" Diameter - 11 Blades - 2.5" Pilot

$275.00

A 32" diameter, 9 blade engine cooling fan

Fan Blade - 32" Diameter - 9 Blades - 2.5" Pilot

$235.00

Fan Blade - 32" Diameter - 9 Blades - 5" Pilot

$322.00

Fan Solenoid - Normally Closed - 2 Speed

$150.00

Fan Solenoid - Normally Closed - On/Off

$150.00

Fan Solenoid - Normally Open - On/Off

$150.00

Front Engine Mount Bracket - Cat C12

$550.00

Front Engine Mount Bracket - Cat C15/3406E

$595.00

Front Engine Mount Bracket - Cummins ISX

$825.00

Front Engine Mount Bracket - Detroit Series 60 - Kenworth or Peterbilt

$1,370.00

Front Engine Mount Bushing Kit - with Hardware

$250.00

Kenworth NAMUX1 Harness - T2000 Only with CLC Cummins CM871

$3,650.00

Kenworth Pre 2011 Engine Mounts - Cummins

$750.00

Kenworth Pre 2011 Engine Mounts - Detroit Series 60

$750.00

Kenworth Pre 2011 Engine Mounts- Frame Side Brackets

$1,075.00

Kenworth Pre 2011 Rear Engine Mounts - Caterpillar - Taper Flywheel Housing

$750.00

Kenworth Pre-NAMUX Harness - 97 to 03 Detroit DDEC3/4 - T2000 ONLY - 2

$3,650.00

A piping installation kit for air to air tubes and radiator tubes. The kit includes 2.5" diameter silicone hose, 3" diameter silicone hose, a 90 degree silicone elbow, air to air hose and constant torque clamps.

Piping Install Kit - Cat C12/C13 - Cummins N14/ISX - Detroit S60 DDEC3/4/5

$655.00

A piping install kit for charge air cooler tubes and radiator tubes. The kit includes 2.5" silicone hose, 3" silicone hose, a 90 degree silicone elbow, air to air hoses and stainless steel constant torque clamps.

Piping Install Kit - Cat C15 or 3406E

$655.00

Rear Engine Mount Bushing Kit - Pre 2011 Kenworth

$410.00

Silicone radiator hose that is 2.5" diameter x 6" in length and black in color. The hose is used to connect the radiator tube to the thermostat housing and the radiator tank.

Silicone Radiator Hose - 2.5" Diameter

$23.00

Silicone radiator hose that is 3" diameter and black in color. The hose is used to connect the radiator tube to the water pump outlet.

Silicone Radiator Hose - 3" Diameter

$25.00

A black silicone, 45 degree elbow with a 2.5" diameter.

Silicone Radiator Hose - 45 Degree Elbow - Black

$75.00

A black silicone 90 degree elbow that is 2.5" in diameter.

Silicone Radiator Hose - 90 Degree Elbow

$75.00

Starter - Delco Remy 39MT Gear Reduction

$625.00

Throttle Pedal - Kenworth - Cat ADEM2/2000/3/4 - Firewall Mount

$795.00

Throttle Pedal - Kenworth - Cummins Celect Plus/CM570/CM870 - Firewall Mount

$695.00

Kenworth suspended, firewall mount style throttle pedal for installation of a Cummins with CM871, CM2250 or CM2350 engine electronics.

Throttle Pedal - Kenworth - Cummins CM871/CM2250/CM2350 - Firewall Mount

$695.00

Throttle Pedal - Kenworth - Detroit DDEC3/4/5 - Firewall Mount

$695.00

Throttle Pedal - Kenworth or Peterbilt - Cat ADEM2/2000/3/4 - Floor Mount

$875.00

Kenworth floor mount style throttle pedal for installation of a Cummins with N14 Celect Plus, CM570 or CM870 engine electronics.

Throttle Pedal - Kenworth or Peterbilt - Cummins Celect Plus/CM570/CM870 - Floor Mount

$875.00

Kenworth floor mount style throttle pedal for installation of a Cummins with CM871, CM2250 or CM2350 engine electronics.

Throttle Pedal - Kenworth or Peterbilt - Cummins CM871/CM2250/CM2350 - Floor Mount

$875.00

Throttle Pedal - Kenworth or Peterbilt - Detroit DDEC3/4/5 - Floor Mount

$875.00

Kenworth or Peterbilt Floor Mounted Throttle Pedal Kit with a 3-Pin Triangle Connector for Caterpillar 40 or 70 Pin Engines with ADEM2, ADEM2000, ADEM3 or ADEM4 engine Electronics

Throttle Pedal - Kenworth or Peterbilt- Cat ADEM2/2000/3/4 - Floor Mount - 3 Pin Triangle Connector

$875.00

Throttle position sensor and extension harness for installation of a Caterpillar engine with ADEM2, ADEM2000, or ADEM3 engine electronics.

Throttle Position Sensor - Cat ADEM2/2000/3 with Extension Harness

$255.00

Caterpillar 40 or 70 Pin Throttle Position Sensor with Extension Harness for ADEM2, ADEM2000, ADEM3 or ADEM4 Cat ECM Electronics

Throttle Position Sensor - Cat ADEM2/2000/3/4 with Extension Harness - 3 Pin Triangle Connector

$255.00

Throttle Position Sensor - Cummins Celect Plus/CM570/CM870 or Detroit DDEC3/4/5

$255.00

Throttle Position Sensor - Cummins CM871/CM2150/CM2250/CM2350 with Extension Harness

$255.00

TPS Extension Harness - Cummins Celect Plus/CM570/CM870 - NAMUX2/3 - Kenworth or Peterbilt

$125.00

TPS Extension Harness - Detroit DDEC3/4/5 - 5 Wire - Peterbilt NAMUX2/3 - Kenworth NAMUX2

$125.00