Kenworth T600 Detroit Diesel Parts

A universal 22-degree air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 22 Degree - 6"

$52.00

A universal 90-degree LONG RADIUS air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 90 Degree - 6" - Long Radius

$139.00

A universal 90-degree short radius air intake elbow, 6" x 6" OD Tube

Air Intake Elbow - 90 Degree - 6" - Short Radius

$34.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5"

$34.00

A universal air intake straight hump hose. Each side of the hump hose accepts a 6" OD tube.

Air Intake Hump Hose - Straight - 6"

$34.00

Alternator - Presto Lite Pad Mount 170 Amp

$350.00

Set of serpentine belts for a Detroit Series 60

Belt Set - 10/8 Groove Serpentine - Top Mount - 12" Fan Center Height

$110.00

A Detroit Diesel Series 60 Air Intake Manifold

CAC Air Intake Manifold - Detroit DDEC3/4 - Kenworth or Peterbilt

$2,995.00

Carrier Bearing Plate

$105.00

An air to air hose used to connect the left or right side charge air cooler tube to the engine and the charge air cooler.

Charge Air Cooler Hump Hose - Black

$40.00

A stainless steel constant torque clamp typically used to clamp an intake boot to the pipe. For use on 6" diameter intake systems.

Clamp - Constant Torque - 6" Stainless Steel

$16.00

Cross Member Kit - Kenworth

$1,175.00

Detroit Diesel Engine upfit kit for a 10 groove serpentine main drive belt and an 8 groove serpentine accessory drive belt.

Detroit Front Engine Upfit - 10/8 Groove Serpentine Kit - Fits Kenworth T660/T800 or Peterbilt 386

$1,815.00

Detroit Front Engine Upfit - Accessory Drive Kit

$1,125.00

A generic engine control harness to install a Detroit Diesel Series 60 engine with DDEC3 or DDEC4 electronics, cab to engine ecm harness.

Detroit Legacy Engine Harness - S60 DDEC3 or DDEC4 Harness

$3,650.00

A toggle switch, dash label and sensor kit for the dash of a heavy duty truck

Detroit Legacy Engine Harness - S60 DDEC3, DDEC4 and DDEC5 - Switch, Sensor and Label Kit

$750.00

A generic engine control harness to install a Detroit Diesel Series 60 engine with DDEC5 electronics, cab to engine ecm harness.

Detroit Legacy Engine Harness - S60 DDEC5 Harness

$3,650.00

Exhaust Piping - Level 1 - Below Frame

$600.00

Fan Blade - 30" Diameter - 9 Blades - 2.5" Pilot

$235.00

A 30 inch diameter, 9 blade fan with a 5 inch pilot diameter

Fan Blade - 30" Diameter - 9 Blades - 5" Pilot

$290.00

Fan Blade - 32" Diameter - 11 Blades - 2.5" Pilot

$275.00

A 32" diameter, 9 blade engine cooling fan

Fan Blade - 32" Diameter - 9 Blades - 2.5" Pilot

$235.00

Fan Blade - 32" Diameter - 9 Blades - 5" Pilot

$322.00

A Horton Drivemaster Advantage Fan Hub for Detroit Series 60 engines

Fan Hub - Detroit Series 60 - On/Off 10 Groove Serpentine - DM Advantage 2

$1,695.00

Fan Solenoid - Normally Closed - 2 Speed

$150.00

Fan Solenoid - Normally Closed - On/Off

$150.00

Fan Solenoid - Normally Open - On/Off

$150.00

Detroit Diesel Series 60 Front motor mount for Peterbilt and Kenworth trucks

Front Engine Mount Bracket - Detroit Series 60 - Kenworth or Peterbilt

$1,370.00

Front Engine Mount Bushing Kit - with Hardware

$250.00

Kenworth Exhaust Piping - Level 1 - Above Frame

$525.00

Kenworth Level 2 Above the frame exhaust piping kit

Kenworth Exhaust Piping - Level 2 - Above Frame

$925.00

Exhaust piping adapter kit to get from the back of turbo to the front of the "Y" Pipe on a Kenworth truck with a below the frame exhaust system.

Kenworth Exhaust Piping - Level 2 - Below Frame

$925.00

Exhaust piping adapter kit to get from the back of turbo to through the "Y" Pipe on a Kenworth truck with a below the frame standard Kenworth exhaust system.

Kenworth Exhaust Piping - Level 3 - Below Frame - For OEM Elbows

$1,425.00

Exhaust piping adapter kit to get from the back of turbo to through the "Y" Pipe on a Kenworth truck with a below the frame Pickett Style exhaust system.

Kenworth Exhaust Piping - Level 3 - Below Frame - For Pickett Elbows

$1,200.00

Kenworth Exhaust Piping - Level 3 - Below Frame - For Single Right Side

$995.00

Engine installation harness for installing a Detroit Series 60 engine (DDEC5 engine electronics) into a Kenworth truck with NAMUX1 chassis electronics and Caterpillar 70 Pin ADEM3 engine electronics.

Kenworth NAMUX1 Harness - Detroit DDEC5 - 1

$2,950.00

Kenworth NAMUX1 Harness - Detroit DDEC5 - 2

$2,950.00

Kenworth Pre 2011 Engine Mounts - Detroit Series 60

$750.00

Kenworth Pre 2011 Engine Mounts- Frame Side Brackets

$1,075.00

Kenworth Pre-NAMUX Harness - 04 to 05 Detroit DDEC3/4 - 1

$2,950.00

Kenworth Pre-NAMUX Harness - 04 to 05 Detroit DDEC3/4 - 2

$2,750.00

Kenworth Pre-NAMUX Harness - 04 to 05 Detroit DDEC5 - 2

$2,550.00

Kenworth Pre-NAMUX Harness - 94 to 98 Detroit DDEC3/4 - 1

$3,950.00

Engine installation harness for installing a Detroit Series 60 engine (DDEC5 engine electronics) into a Pre-NAMUX 1994-1998 Kenworth truck with Caterpillar 40 Pin ADEM2 chassis electronics.

Kenworth Pre-NAMUX Harness - 94 to 98 Detroit DDEC5 - 1

$3,950.00

Kenworth Pre-NAMUX Harness - 94 to 99 Detroit DDEC3/4 - 3

$3,650.00

Kenworth Pre-NAMUX Harness - 94 to 99 Detroit DDEC5 - 3

$3,650.00

Engine installation harness for installing a Detroit Series 60 engine (DDEC3 or DDEC4 engine electronics) into a Pre-NAMUX 1996-2001 Kenworth truck with Cummins Celect Plus chassis electronics.

Kenworth Pre-NAMUX Harness - 96 to 01 Detroit DDEC3/4 - 2

$3,650.00

Kenworth Pre-NAMUX Harness - 96 to 01 Detroit DDEC5 - 2

$3,650.00

Kenworth Pre-NAMUX Harness - 99 to 03 Detroit DDEC3/4 - 1

$3,950.00

Kenworth Pre-NAMUX Harness - 99 to 03 Detroit DDEC3/4 - 2

$3,650.00

Kenworth Pre-NAMUX Harness - 99 to 03 Detroit DDEC5 - 2

$3,650.00

Lower Exhaust Elbow - Above Frame

$90.00

Lower Exhaust Elbow - Below Frame

$240.00

A piping installation kit for air to air tubes and radiator tubes. The kit includes 2.5" diameter silicone hose, 3" diameter silicone hose, a 90 degree silicone elbow, air to air hose and constant torque clamps.

Piping Install Kit - Cat C12/C13 - Cummins N14/ISX - Detroit S60 DDEC3/4/5

$655.00

Rear Engine Mount Bushing Kit - Pre 2011 Kenworth

$410.00

Silicone radiator hose that is 2.5" diameter x 6" in length and black in color. The hose is used to connect the radiator tube to the thermostat housing and the radiator tank.

Silicone Radiator Hose - 2.5" Diameter

$23.00

A black silicone, 45 degree elbow with a 2.5" diameter.

Silicone Radiator Hose - 45 Degree Elbow - Black

$75.00

A black silicone 90 degree elbow that is 2.5" in diameter.

Silicone Radiator Hose - 90 Degree Elbow

$75.00

Starter - Delco Remy 39MT Gear Reduction

$625.00

Throttle Pedal - Kenworth - Detroit DDEC3/4/5 - Firewall Mount

$695.00

Throttle Pedal - Kenworth or Peterbilt - Detroit DDEC3/4/5 - Floor Mount

$875.00

Throttle Position Sensor - Cummins Celect Plus/CM570/CM870 or Detroit DDEC3/4/5

$255.00

Detroit Series 60 DDEC3, DDEC4 or DDEC5 Throttle Position Sensor extension harness

TPS Extension Harness - Detroit DDEC3/4/5 - 5 Wire - Peterbilt NAMUX2/3 - Kenworth NAMUX2

$125.00

Turbo Exhaust Elbow - Above Frame - 5" Diameter

$138.00

Turbo Exhaust Elbow - Below Frame - 5" Diameter

$180.00

Turbo V Clamp - 5" Diameter - Stainless Steel

$25.00