Peterbilt 579 Cummins Parts

AC High Pressure NC Switch

$45.00

A universal 90-degree LONG RADIUS air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 90 Degree - 6" - Long Radius

$139.00

A universal 90-degree short radius air intake elbow, 6" x 6" OD Tube

Air Intake Elbow - 90 Degree - 6" - Short Radius

$34.00

A 90-degree reducing air intake elbow, 5" x 4" OD tube.

Air Intake Elbow - 90 Degree Reducing - 5" x 4"

$34.00

90 Degree Air Intake Elbow reduces from 5.5" inside diameter to 5" inside diameter

Air Intake Elbow - 90 Degree Reducing - 5.5" x 5"

$25.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5"

$34.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5.5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5.5"

$54.00

A universal air intake straight hump hose. Each side of the hump hose accepts a 6" OD tube.

Air Intake Hump Hose - Straight - 6"

$34.00

Alternator - Presto Lite Pad Mount 170 Amp

$350.00

Alternator Pulley - 12 Groove Serpentine

$156.00

Battery Cable Kit - Extended Length

$795.00

Battery Cable Kit - Standard Length

$535.00

A battery hold down kit for Peterbilt trucks that have a step box battery box underneath the drivers or passenger side door.

Battery Hold Down Kit - Peterbilt Step Box Battery Box

$310.00

A set of serpentine belts for a Cummins ISX engine with a 12 groove main drive belt and a 6 groove accessory drive belt

Belt Set - Cummins 12/6 Groove Serpentine - Side Mount - 12" Fan Center Height

$145.00

CAC Air Intake Manifold - Cummins N14 Celect Plus - Kenworth or Peterbilt

$3,330.00

Carrier Bearing Plate

$105.00

An air to air hose used to connect the left or right side charge air cooler tube to the engine and the charge air cooler.

Charge Air Cooler Hump Hose - Black

$40.00

Charge System Harness - NAMUX4

$825.00

A 4" stainless steel constant torque clamp

Clamp - Constant Torque - 4" Stainless Steel

$16.00

Constant Torque CT-650 clamp with stainless steel finish

Clamp - Constant Torque - 5" Stainless Steel

$13.00

A 5.5" stainless steel constant torque clamp

Clamp - Constant Torque - 5.5" Stainless Steel

$19.00

A stainless steel constant torque clamp typically used to clamp an intake boot to the pipe. For use on 6" diameter intake systems.

Clamp - Constant Torque - 6" Stainless Steel

$16.00

Clutch Micro Switch

$40.00

Coolant Distribution Manifold - 3 Port - Bare Block

$545.00

Kustom Truck 3-port coolant distribution manifold kit

Coolant Distribution Manifold - 3 Port - With Fittings

$1,195.00

Coolant Distribution Manifold - 5 Port - Bare Block

$695.00

Kustom Truck 5-port coolant distribution manifold kit

Coolant Distribution Manifold - 5 Port - With Fittings

$1,780.00

Cummins Front Engine Upfit - ISM/M11 - 8 Groove Serpentine

$2,250.00

Cummins ISX 12/6 groove serpentine belt configuration kit

Cummins Front Engine Upfit - ISX - 12/6 Groove Configuration

$3,525.00

Cummins Fuel Line Plumbing Kit - Compression Fittings & Composite Hose

$330.00

Cummins Fuel Line Plumbing Kit - JIC Fittings & Nitrile Braided Hose

$595.00

A Cummins N14 Thermostat with Vertical Outlet

Cummins N14 Thermostat Housing - Vertical Outlet

$1,285.00

Exhaust Piping - Level 1 - Below Frame

$600.00

Fan Blade - 30" Diameter - 9 Blades - 2.5" Pilot

$235.00

A 30 inch diameter, 9 blade fan with a 5 inch pilot diameter

Fan Blade - 30" Diameter - 9 Blades - 5" Pilot

$290.00

Fan Blade - 32" Diameter - 11 Blades - 2.5" Pilot

$275.00

A 32" diameter, 9 blade engine cooling fan

Fan Blade - 32" Diameter - 9 Blades - 2.5" Pilot

$235.00

Fan Blade - 32" Diameter - 9 Blades - 5" Pilot

$322.00

Fan Hub - Cummins N14 - On/Off Dual V Belt - HT/S Advantage

$1,725.00

A 3 inch stainless steel fan shroud extension ring.

Fan Shroud Extension Ring 3" with Rivets

$450.00

Fan Solenoid - Normally Closed - 2 Speed

$150.00

Fan Solenoid - Normally Closed - On/Off

$150.00

Fan Solenoid - Normally Open - On/Off

$150.00

Front engine mount bracket for Peterbilt or Kenworth truck with a Cummins ISM or M11 engines.

Front Engine Mount Bracket - Cummins ISM or M11

$1,805.00

Front Engine Mount Bracket - Cummins ISX

$825.00

Front Engine Mount Bushing Kit - with Hardware

$250.00

Front Trunion Support Bracket Kit with Hardware

$425.00

silicone coolant hose .062 inches diameter x 25 feet long cut length

Heater Hose - Silicone - 5/8" Black - 25 ft Roll

$140.00

Heater Hose Plumbing Kit - Peterbilt Day Cab or All Kenworth Trucks - Black

$285.00

Heater Hose Plumbing Kit - Peterbilt Day Cab or All Kenworth Trucks - Black - For Use With Kustom Coolant Manifold

$495.00

Heater Hose Plumbing Kit - Peterbilt Day Cab or All Kenworth Trucks - Blue

$285.00

J1587 Jumper harness for NAMUX4 Kenworth and Peterbilt Trucks

Kenworth or Peterbilt Harness - J1587 Firewall to OBD - NAMUX4

$125.00

Peterbilt Exhaust Piping - Level 2 - Below Frame

$1,065.00

Peterbilt Exhaust Piping - Level 3 - Below Frame - For OEM Elbows

$1,975.00

Peterbilt Exhaust Piping - Level 3 - Below Frame - For Pickett Elbows

$1,340.00

Glider Kit engine installation harness for installing a Cummins N14 engine (Celect Plus engine electronics) into a Peterbilt 579 truck with NAMUX4 chassis electronics.

Peterbilt NAMUX4 Harness - 579 Cummins Celect Plus with Processor

$3,950.00

Engine installation harness for installing a Cummins ISX engine (CM2350 or CM2450 engine electronics) into a Peterbilt 579 truck with NAMUX4 chassis electronics.

Peterbilt NAMUX4 Harness - 579 Cummins CM2350/CM2450

$3,450.00

Glider Kit engine installation harness for installing a Cummins ISX engine (CM570 engine electronics) into a Peterbilt 579 truck with NAMUX4 chassis electronics.

Peterbilt NAMUX4 Harness - 579 Cummins CM570

$3,110.00

Glider Kit engine installation harness for installing a Cummins ISX engine (CM870 or CM875 engine electronics) into a Peterbilt 579 truck with NAMUX4 chassis electronics.

Peterbilt NAMUX4 Harness - 579 Cummins CM870/875

$3,450.00

Peterbilt Pre 2012 - Frame Side Brackets

$1,195.00

Peterbilt Trelleborg Style - 2 Bolt - Frame Side - Peterbilt ONLY

$1,255.00

Peterbilt Trelleborg Style - 4 Bolt - Caterpillar or Cummins - Taper Flywheel Housing

$885.00

Peterbilt Trelleborg Style - 4 Bolt - Frame Side - Peterbilt ONLY

$1,290.00

A piping installation kit for air to air tubes and radiator tubes. The kit includes 2.5" diameter silicone hose, 3" diameter silicone hose, a 90 degree silicone elbow, air to air hose and constant torque clamps.

Piping Install Kit - Cat C12/C13 - Cummins N14/ISX - Detroit S60 DDEC3/4/5

$655.00

The fuse harness provides power from the battery box to the alternator positive on Kenworth and Peterbilt NAMUX4 trucks.

Power Harness - NAMUX4

$1,565.00

A TRW EV Series Power Steering Pump with Right Hand Rotation

Power Steering Pump - Cummins ISX or CAT C12 - Single Gear Box 12-16K Front Axle

$725.00

Primary Fuel Filter Kit - Cummins Engine

$165.00

Silicone radiator hose that is 2.5" diameter x 6" in length and black in color. The hose is used to connect the radiator tube to the thermostat housing and the radiator tank.

Silicone Radiator Hose - 2.5" Diameter

$23.00

A black silicone, 45 degree elbow with a 2.5" diameter.

Silicone Radiator Hose - 45 Degree Elbow - Black

$75.00

A black silicone 90 degree elbow that is 2.5" in diameter.

Silicone Radiator Hose - 90 Degree Elbow

$75.00

Kenworth floor mount style throttle pedal for installation of a Cummins with N14 Celect Plus, CM570 or CM870 engine electronics.

Throttle Pedal - Kenworth or Peterbilt - Cummins Celect Plus/CM570/CM870 - Floor Mount

$875.00

Kenworth floor mount style throttle pedal for installation of a Cummins with CM871, CM2250 or CM2350 engine electronics.

Throttle Pedal - Kenworth or Peterbilt - Cummins CM871/CM2250/CM2350 - Floor Mount

$875.00

Trelleborg Style Engine Mounts - 2 Bolt - Caterpillar or Cummins - Taper Flywheel Housing

$825.00

Turbo V Clamp - 5" Diameter - Stainless Steel

$25.00