Kenworth T660 Cummins Parts

AC Compressor - Ear Mount Base - Dual V Belt Clutch

$385.00

AC Compressor - Pad Side Mount Base - Cat or Cummins 6 Groove

$385.00

AC Compressor Clutch - 6 Groove Serpentine

$160.00

AC High Pressure NC Switch

$45.00

AC Plumbing - Kenworth or Peterbilt - Discharge Line

$445.00

Kenworth Air Intake Piping Kit for an engine mounted, under hood air cleaner assembly that fits a Cummins ISX CM570, Detroit Diesel Series 60 DDEC3, DDEC4 and DDEC5 or a Caterpillar C12 engine.

Air Intake Adapter Piping Kit - Kenworth - Cummins ISX CM570 - Detroit DDEC3/4/5 - Cat C12 - Engine Mounted Air Cleaner

$335.00

Piping adapter kit to connect the air intake on a Kenworth T660 or T800 truck with engine mounted air cleaner to the turbo on a Cummins N14 engine.

Air Intake Adapter Piping Kit - Kenworth - Cummins N14 - Engine Mounted Air Cleaner

$395.00

A universal 22-degree air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 22 Degree - 6"

$52.00

A universal 90-degree LONG RADIUS air intake elbow. Each side of the elbow accepts a 6" OD tube.

Air Intake Elbow - 90 Degree - 6" - Long Radius

$139.00

A universal 90-degree short radius air intake elbow, 6" x 6" OD Tube

Air Intake Elbow - 90 Degree - 6" - Short Radius

$34.00

A 90-degree reducing air intake elbow, 5" x 4" OD tube.

Air Intake Elbow - 90 Degree Reducing - 5" x 4"

$34.00

90 Degree Air Intake Elbow reduces from 5.5" inside diameter to 5" inside diameter

Air Intake Elbow - 90 Degree Reducing - 5.5" x 5"

$25.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5"

$34.00

A 90-degree air intake elbow, this is a reducing elbow, 6" x 5.5" OD tube.

Air Intake Elbow - 90 Degree Reducing - 6" x 5.5"

$54.00

A universal air intake straight hump hose. Each side of the hump hose accepts a 6" OD tube.

Air Intake Hump Hose - Straight - 6"

$34.00

Alternator - Presto Lite Pad Mount 170 Amp

$350.00

Alternator Pulley - 12 Groove Serpentine

$156.00

Battery Cable Kit - Extended Length

$795.00

Battery Cable Kit - Standard Length

$535.00

Battery Hold Down Kit - Kenworth Cantilever Box

$495.00

Battery Hold Down Kit - Kenworth Step Box Battery Box

$310.00

A set of serpentine belts for a Cummins ISX engine with a 12 groove main drive belt and a 6 groove accessory drive belt

Belt Set - Cummins 12/6 Groove Serpentine - Side Mount - 12" Fan Center Height

$145.00

CAC Air Intake Manifold - Cummins N14 Celect Plus - Kenworth or Peterbilt

$3,330.00

Carrier Bearing Plate

$105.00

An air to air hose used to connect the left or right side charge air cooler tube to the engine and the charge air cooler.

Charge Air Cooler Hump Hose - Black

$40.00

A 4" stainless steel constant torque clamp

Clamp - Constant Torque - 4" Stainless Steel

$16.00

Constant Torque CT-650 clamp with stainless steel finish

Clamp - Constant Torque - 5" Stainless Steel

$13.00

A 5.5" stainless steel constant torque clamp

Clamp - Constant Torque - 5.5" Stainless Steel

$19.00

A stainless steel constant torque clamp typically used to clamp an intake boot to the pipe. For use on 6" diameter intake systems.

Clamp - Constant Torque - 6" Stainless Steel

$16.00

Clutch Micro Switch

$40.00

Coolant Distribution Manifold - 3 Port - Bare Block

$545.00

Kustom Truck 3-port coolant distribution manifold kit

Coolant Distribution Manifold - 3 Port - With Fittings

$1,195.00

Coolant Distribution Manifold - 5 Port - Bare Block

$695.00

Kustom Truck 5-port coolant distribution manifold kit

Coolant Distribution Manifold - 5 Port - With Fittings

$1,780.00

Cooling Module Ground Harness - Kenworth or Peterbilt

$115.00

Cross Member Kit - Kenworth

$1,175.00

Cummins Front Engine Upfit - ISM/M11 - 8 Groove Serpentine

$2,250.00

Cummins ISX 12/6 groove serpentine belt configuration kit

Cummins Front Engine Upfit - ISX - 12/6 Groove Configuration

$3,525.00

Cummins Fuel Line Plumbing Kit - Compression Fittings & Composite Hose

$330.00

Cummins Fuel Line Plumbing Kit - JIC Fittings & Nitrile Braided Hose

$595.00

A Cummins N14 Thermostat with Vertical Outlet

Cummins N14 Thermostat Housing - Vertical Outlet

$1,285.00

Exhaust Kit - Dynaflex - Peterbilt/Kenworth

$3,950.00

Exhaust Kit - Lincoln Chrome - Peterbilt/Kenworth

$3,950.00

Exhaust Piping - Level 1 - Below Frame

$600.00

Fan Blade - 30" Diameter - 9 Blades - 2.5" Pilot

$235.00

A 30 inch diameter, 9 blade fan with a 5 inch pilot diameter

Fan Blade - 30" Diameter - 9 Blades - 5" Pilot

$290.00

Fan Blade - 32" Diameter - 11 Blades - 2.5" Pilot

$275.00

A 32" diameter, 9 blade engine cooling fan

Fan Blade - 32" Diameter - 9 Blades - 2.5" Pilot

$235.00

Fan Blade - 32" Diameter - 9 Blades - 5" Pilot

$322.00

Fan Hub - Cummins ISX - On/Off 12 Groove Serpentine - DM Advantage

$1,690.00

Fan Hub - Cummins N14 - On/Off Dual V Belt - HT/S Advantage

$1,725.00

A 3 inch stainless steel fan shroud extension ring.

Fan Shroud Extension Ring 3" with Rivets

$450.00

Fan Solenoid - Normally Closed - 2 Speed

$150.00

Fan Solenoid - Normally Closed - On/Off

$150.00

Fan Solenoid - Normally Open - On/Off

$150.00

Front engine mount bracket for Peterbilt or Kenworth truck with a Cummins ISM or M11 engines.

Front Engine Mount Bracket - Cummins ISM or M11

$1,805.00

Front Engine Mount Bracket - Cummins ISX

$825.00

Front Engine Mount Bushing Kit - with Hardware

$250.00

Front Trunion Support Bracket Kit with Hardware

$425.00

a fuel filter restriction sensor kit with Compression fitting

Fuel Filter Restriction Kit - Compression Fittings

$495.00

Fuel Filter Restriction Kit - JIC Fittings

$495.00

silicone coolant hose .062 inches diameter x 25 feet long cut length

Heater Hose - Silicone - 5/8" Black - 25 ft Roll

$140.00

Heater Hose Plumbing Kit - Peterbilt Day Cab or All Kenworth Trucks - Black

$285.00

Heater Hose Plumbing Kit - Peterbilt Day Cab or All Kenworth Trucks - Black - For Use With Kustom Coolant Manifold

$495.00

Heater Hose Plumbing Kit - Peterbilt Day Cab or All Kenworth Trucks - Blue

$285.00

J1587 Data Bus Block

$86.00

Jumper Harness - J1587 - Data Bus Block to Firewall Connector

$125.00

Jumper Harness - J1587 - Diagnostic Plug to Data Bus Block

$125.00

Kenworth 2017+ NAMUX3 Harness - Cummins CM2350

$2,950.00

Kenworth AC Plumbing - Suction Line

$225.00

Kenworth Bracket Kit - T660 Underhood Air Cleaner Mounting Kit

$750.00

An exhaust support bracket kit that is used on Kenworth trucks that have an above the frame exhaust system with a single right side above from exhaust.

Kenworth Bracket Kit - Support Bracket RS Above Frame Single Exhaust

$650.00

Kenworth Charge System Harness - NAMUX3

$280.00

Kenworth Exhaust Piping - Level 1 - Above Frame

$525.00

Exhaust piping kit for a Cummins ISX model engine with a 4" Turbo outlet diameter

Kenworth Exhaust Piping - Level 1 - Above Frame - Cummins CM870 or CM871

$1,435.00

Kenworth Level 2 Above the frame exhaust piping kit

Kenworth Exhaust Piping - Level 2 - Above Frame

$925.00

Exhaust piping adapter kit to get from the back of turbo to the front of the "Y" Pipe on a Kenworth truck with a below the frame exhaust system.

Kenworth Exhaust Piping - Level 2 - Below Frame

$925.00

Exhaust piping adapter kit to get from the back of turbo to through the "Y" Pipe on a Kenworth truck with a below the frame standard Kenworth exhaust system.

Kenworth Exhaust Piping - Level 3 - Below Frame - For OEM Elbows

$1,425.00

Exhaust piping adapter kit to get from the back of turbo to through the "Y" Pipe on a Kenworth truck with a below the frame Pickett Style exhaust system.

Kenworth Exhaust Piping - Level 3 - Below Frame - For Pickett Elbows

$1,200.00

Kenworth Exhaust Piping - Level 3 - Below Frame - For Single Right Side

$995.00

An engine harness to install a Cummins ISX CM2250 engine into a Kenworth NAMUX1 truck

Kenworth NAMUX2 Harness - Cummins CM2250

$2,550.00

An engine harness to install a Cummins ISX CM2350 engine into a Kenworth NAMUX1 truck

Kenworth NAMUX2 Harness - Cummins CM2350

$2,950.00

Kenworth NAMUX2 Harness - Cummins CM871

$2,750.00

Glider Kit engine installation harness for installing a Cummins N14 engine (Celect Plus engine electronics) into a Kenworth truck with NAMUX3 chassis electronics.

Kenworth NAMUX3 Harness - Cummins Celect Plus with Processor

$3,650.00

Engine installation harness for installing a Cummins ISX engine (CM2250 engine electronics) into a Kenworth truck with NAMUX3 chassis electronics.

Kenworth NAMUX3 Harness - Cummins CM2250

$2,550.00

Kenworth NAMUX3 Harness - Cummins CM2350

$2,950.00

Glider Kit engine installation harness for installing a Cummins ISX engine (CM570 engine electronics) into a Kenworth truck with NAMUX3 chassis electronics.

Kenworth NAMUX3 Harness - Cummins CM570

$2,350.00

Glider Kit engine installation harness for installing a Cummins ISX engine (CM870 engine electronics) into a Kenworth truck with NAMUX3 chassis electronics.

Kenworth NAMUX3 Harness - Cummins CM870

$2,550.00

Kenworth NAMUX3 Harness - Cummins CM871

$2,550.00

Kenworth NAMUX3 Harness - Cummins CM875

$2,550.00

Kenworth NAMUX3 Harness - Cummins CM876

$2,550.00

A J1587 dash jumper harness that works for both Kenworth or Peterbilt trucks. The J1587 dash jumper includes a 2 piece firewall to bus block and bus block bypass to OBD extension.

Kenworth or Peterbilt Harness - GEN2 J1587 Dash Jumper - 2 Piece Firewall to Bus Block and Bus Block Bypass to OBD

$125.00

A J1587 jumper harness that works for both Kenworth or Peterbilt trucks. The J1587 harness is to be installed when bypassing the bus block to OBD port.

Kenworth or Peterbilt Harness - J1587 Bus Block Bypass to OBD

$125.00

A 2010 and newer Kenworth Power distribution harness kit that supplies power to the chassis and engine.

Kenworth Power Distribution Kit - NAMUX3 - Extended Length

$2,195.00

Kenworth Power Distribution Kit - NAMUX3 - Standard Length

$1,895.00

An installation harness to supply power from the alternator when charging back to the battery positive.

Kenworth Power Feed Harness - NAMUX3

$1,290.00